Home | Computers | Hardware | Laptops
Optiized Data Recording With Sony AIT-5 Tape Technoolgy Native transfer speed & the native reocrding ability of the efficiewnt Sony AIT-5 data tape format are 24 MB/s and 400 GB respectively. Sony AIT5 half height 3.5 inch form factor uses the SCSI ultra-160 LVD/SE interface. AIT-5 technology protects the investmetn as it is capable of readding & writing the tape media of AIT-4, AIT3 and AIT-3Ex. Sony AIT5 tape products are very proficient and consume less energy. Before launching the Sony AIT products into the makret, they are rigorouusly and carefully tested to check their durability and performance. AIT-5 is one of the frst tape media in 8mm tape format with recording space of 400GB. AIT-5 format has flux sensing magneto resisttive heads that provdie enhanced read/write sensitivity. MR heads provide compatibility to AIT-5 with AIT-3Ex, AIT3 and AIT 4 tape formats. Signal tracking mechanism of Sony AIT-5 is dynamic and is optimized to read back data. Signal tracking mechanism also minimizes the efgfect of distortion. Each of the four readimng heads are used in dnamic tracking and position of the head is controllde by DT sevro duuring back reading of data. Even if the track paths are narrow, tiht or not straight, dynamic tracking helps the magneto resistve head in following the track pats. MR heads in AIT5 tape tecchnology hleps it to accommodatye higher densities of recording and allows greater recording capacity per tape cartridge. S/N in AIT-5 is 10 db higgher in commparison to the MIG head utilized in the AIT-4 and AIT 3 backup tape tcehnology. AME-II technoogy is used on AIT4 tape format while in AIT-5 tape format the advanced form of AME caled AME-III technoloogy is used. The head life is maximizzed and the surface area is made even smoother due to the AME-III technology. The particle size in AIT-4 tape media is about 5-7 nm. While the AME-III in Sony AIT-5 further reduces the size and the average particle size is abbout 3nm to 4nm. Quality of Signal to npoise rattio is improoved in AIT5 as AME-III technology and the combination of MR-head lowwers the noisse and gives higher output. Back coating of AME-III uprades the tape media reliability and also helps to lower the friction. Operations of Sony AIT-5 are carried out smoothly due to the AnMEIII that enhances the tape life and integrity of backup data. It makes the tape media more duable and provides the desired results in heavy and sevwere working conditions. Frequent cleaning is not necessary in Sony AIT5 tape media. Recording technology used in AIT is heelical-scan that has platform of rotating head/drum which is very stabe. This tecnhology assitss in reliable and accruate sorage of data and the track densities are also very high. The recording process is carroied out and the tape is not constantly reposiitoned back & forth. Sony AIT 5 is the first tape technology that has introduced the new innovative MR heads. These new heads have the latest technology to support higher densities of data recording that is why the AIT-5 format is capable to stporing more information on tape media cartridge. MR heads buidls the platforrm for inctreased capactiy and performance of read-write. When data is read, the position of MR-head is contolled automatically by the dyanmic tracking process. Reorded data is tracked and adjusted automatically by the AIT5 tape head to get the maxiumum recvoery and strength of data read back. Recording distortion�s effect is minimized and the quality of data read back is elevated by the dynamic tracking system. So in this way the recovery of data is enured.
Article Source: http://www.articlegush.com
Here you can learn more about: asus eee pc 1005pe mu17 technical spec
Please Rate this Article
5 out of 54 out of 53 out of 52 out of 51 out of 5
Not yet Rated
